PRODUCTION

Branches stamp-welded and stamped sharply-bent Branches stamp-welded and stamped sharply-bent

Branches stamp-welded and stamped sharply-bent

Branches stamp-welded and stamped sharply-bent

Branches stamp-welded and stamped sharply-bent for pipelines with an operating pressure up to 32.0 MPa and bending radius 1.0DN and 1.5DN angles of 30°, 45°, 60°, 90° with the nominal connection diameter D from 530 to 1420 mm with construction length L in accordance with OTT-23.040.00-KTN-190-10 and STO 2-4.1-713-2013 and, if necessary, in accordance with the dimensions on request.

D - nominal connection diameter, mm;
L - construction length, mm;
R - bending radius (1.0DN, 1.5DN), mm;
φ - bending angle, degrees